Lightweight carbon integrated cockpit drop handlebars, suitable for the HUP GCX gravel bike, from #HUPcc!
A compact design for a comfortable and efficient bike fit. Sizes available are 36cm, 38cm and 40cm, with the compact 75mm reach required to avoid over-stretching. A drop of 130mm means you can still get aero on the drops too (especially on slightly higher gravel bike stacks) plus a flat-topped, aero and ergonomic top tube brings more comfort on those long days in the saddle. Full internal cable routing, designed for Token A-box headsets and spacers, for that seamless internal cable routing and a clean, aerodynamic profile on your bike.
- HUP CCB-001: Toray 700 carbon cockpit drop handlebars (standard 2-bolt Garmin mount on underside) includes aero top-cap and bolt
- Centre-To-Centre Width (at bottom): 36cm, 38cm & 40cm
- Stem Lengths: 80mm, 90mm, 100mm, 110mm & 120mm
- Fork steerer: 1 1/8" (28.6mm)
- Reach: 75mm
- Drop: 130mm
- Outside witdth at Top of Hoods*: 36cm = 340mm, 38cm = 360mm, 40cm = 380mm
- Outsdie Width at Shifters*: 36cm = 360mm, 38cm = 380mm, 40cm = 400mm
- CTC width at Bottom of Drops*: 36cm = 360mm, 38cm = 380mm, 40cm = 400mm
- Headtube angle: designed for 70 to 73 degrees
- Headset system: compatible with Token A-box system
- Weight: 310g (36cm) to 340g (40cm)
- Colour: Black
- Model suitability: HUP GCX (not HUP evo)
- Road, Gravel or Cyclocross Bikes to ASTM category 2
*Measurement includes standard 2.5mm bar tape. Recommended stem bolt torque = 5Nm (never exceed 7Nm). Bolts require an Allen key both ends. The rear edge of the steerer hole on the cockpit, represents the same height position as the underside of the top cap, so finished steerer should be 1-2mm below the rear edge of the steerer hole on the cockpit. We recommend initially adding an additional steerer spacer above your stack requirement, to avoid cutting your fork too short. More installation details HERE